Acier Lintels - Steel Lintels, Special Lintels, Structural Supports and Sun Lounges

95-110mm Cavity - Wide Inner Leaf

L1/S WIL 100

For 95-110mm cavity wall with wide inner block/brick construction.
Standard duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Note:Maximum block dimensions 150mm (95mm cavity)
Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1.
This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors
Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1.
This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications

Manufactured Length 150mm increments	0600 1200	1350 1800	1950 2400	2550 3000	*3150 3600	*3750 4200
Height ‘h’	82	107	142	177	188	188
Thickness ‘t’	2	2	2	2.6	3.2	3.2
Total UDL(kN) Load ratio (1)	13	17	23	24	30	27
Total UDL(kN) Load ratio (2)	11	14	18	18	26	25

[Back to Top]

L1/HD WIL 100

For 95-110mm cavity wall with wide inner block/brick construction.
Heavy duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Manufactured Length 150mm increments	0600 1200	*1350 1500	*1650 1800	*1950 2100	*2250 2700
Height ‘h’	113	135	165	165	188
Thickness ‘t’	3.2	3.2	3.2	3.2	3.2
Total UDL(kN) Load ratio (1)	20	25	35	30	36
Total UDL(kN) Load ratio (2)	17	22	27	25	32

[Back to Top]

L1/XHD WIL 100

For 95-110mm cavity wall with wide inner block/brick construction.
Extra heavy duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Manufactured Length 150mm increments	*0600 1500	*1650 1800	*1950 2100
Height ‘h’	165	188	188
Thickness ‘t’	3.2	3.2	3.2
Total UDL(kN) Load ratio (1)	45	45	50
Total UDL(kN) Load ratio (2)	40	40	40

Return to Standard Lintel Range