 |
|||||
|
50-110mm Cavity - Heavy Duty Lintels
| L5/50 | |
|---|---|
For 50-70mm cavity wall construction. List Price: www.iglintelsprices.com |
 |
| Note: Maximum block dimensions 125mm (50mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications |
|
| Manufactured Length 150mm increments |
0600 1500 |
1650 2100 |
2250 3000 |
3150 4000 |
4200 4800 |
|---|---|---|---|---|---|
| Height ‘h’ | 229 | 229 | 229 | 229 | 229 |
| Thickness ‘t’ | 2.9 | 2.9 | 2.9 | 3.2 | 3.2 |
| Total allowable UDL (kN) | 70 | 60 | 50 | 45 | 40 |
| L5/75 | |
|---|---|
For 70-95mm cavity wall construction. List Price: www.iglintelsprices.com |
 |
| Note: Maximum block dimensions 125mm (70mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications. |
|
| Manufactured Length 150mm increments |
0600 1500 |
1650 2100 |
2250 3000 |
3150 4000 |
4200 4800 |
|---|---|---|---|---|---|
| Height ‘h’ | 229 | 229 | 229 | 229 | 229 |
| Thickness ‘t’ | 2.9 | 2.9 | 2.9 | 3.2 | 3.2 |
| Total allowable UDL (kN) | 70 | 60 | 50 | 45 | 40 |
| L5/100 | |
|---|---|
For 95-110mm cavity wall construction. List Price: www.iglintelsprices.com |
 |
| Note: Maximum block dimensions 125mm (95mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications. |
|
| Manufactured Length 150mm increments |
0600 1500 |
1650 2100 |
2250 3000 |
3150 4000 |
4200 4800 |
|---|---|---|---|---|---|
| Height ‘h’ | 229 | 229 | 229 | 229 | 229 |
| Thickness ‘t’ | 2.9 | 2.9 | 2.9 | 3.2 | 3.2 |
| Total allowable UDL (kN) | 70 | 60 | 50 | 45 | 40 |
